Skip to content

4 problems you will encounter when installing a wall-mounted energy storage batteries

Structural problems

Wall-mounted energy storage batteries need to be installed on the wall. A 5KWH wall-mounted energy storage system weighs about 50KG, and a 10KWH wall-mounted energy storage system weighs about 90KG. Therefore, the wall needs to be strong enough to bear the weight of the system for a long time, otherwise it will damage the overall structure of the wall. However, the weight that a general concrete structure can bear is about 500KG, so there is no need to worry about problems. But in a lightweight wall, the weight that can be borne is about 60KG, and the weight bearing will also change depending on the material, so the structure of the wall needs to be determined in advance during installation.

Problems with electrical circuits

Wall-mounted energy storage batteries are divided into integrated energy storage batteries and single batteries. The integrated energy storage battery itself has an inverter, which eliminates the connection between the inverter and the battery. It only needs to be connected to the photovoltaic panel and the indoor socket to use. A single battery also needs to be connected to an inverter before it can be used.

Environmental considerations

When installing a wall-mounted energy storage batteries, it should be installed in a dry, well-ventilated place as much as possible to ensure that the system is not affected by moisture, otherwise it may damage the system or shorten its service life. Because it is a home energy storage system, it should generally be installed in an indoor environment to avoid direct sunlight. The storage temperature of a general home energy storage system is between 0°C-40°C. If you want to install it outdoors, it is best to choose a battery energy storage system with a temperature control system and a fire protection system.

Local policies and regulations

Wall-mounted energy storage batteries are divided into off-grid and grid-connected, so before installing the system, you must first determine the local, state and national electrical codes and building standards.

3KWH Wall-mounted all-in-one machine

Weight: about 52Kg
Size: 708*520*222mm
IP Class: IP20

5KWH Wall-mounted all-in-one machine

Weight: about 65Kg
Size: 790*520*222mm
IP Class: IP20

5KWH Wall-mounted energy storage battery

Weight: about 42Kg
Size: 600*398*164mm
IP Class: IP55

Leave a Reply

Your email address will not be published. Required fields are marked *